How to install iOS 6

There are two paths for upgrading your current iPhone to iOS 6: over the air or through iTunes.

by Matt Elliott

 September 19, 2012 12:30 PM PDTFollow @themattelliott

Related stories

• CNET review: iOS 6 -- the must-have update you'll barely notice
• Complete guide to using iOS 6

If you didn't line up at your local Apple Store or preorder an iPhone 5, you can still upgrade your iPhone, iPad, and iPod Touch to the latest version of iOS released today. I should say it's likely you can upgrade your current device because the new version of Apple's mobile operating system, iOS 6, is compatible with most but not all previous-generation devices. Here's Apple's list:

(Credit: Screenshot by Matt Elliott/CNET )

You have two methods for downloading and installing iOS 6. You can simply update your iOS device over the air via the device's Settings, or you can connect it to your computer and use iTunes.

Method 1: Over the air
The easier of the methods is to grab your iPhone, iPad, or iPod Touch and update wirelessly. Before doing so, however, it's wouldn't be a bad idea to sync your device with iTunes if you haven't done so in a while. There have been instances with past iOS updates where users have reported the new iOS didn't install correctly, bricking their phone and forcing them to restore their phone before trying again. So, if your iOS device has talked to iTunes recently, go ahead and go to Settings > General > Software Update.

(Credit: Screenshot by Matt Elliott/CNET )

You should see iOS 6 listed, with a Download and Install button below it. Tap the button, agree to Apple's terms and conditions, and either heed or ignore Apple's advice to connect your device to a power source during the download to save battery.

(Credit: Screenshot by Matt Elliott/CNET )

After iOS 6 installs, your device will restart, which was a rather lengthy process in my experience (20 minutes or so, after the roughly 45 minutes it took to download and install). After restarting, you'll be greeted by a shiny, new iOS 6 lock screen. Slide to open your device and click through the following four setup screens:

(Credit: Screenshot by Matt Elliott/CNET )

Method 2: Update via iTunes
If you are near your computer with iTunes, it might be faster to update this way. In my experience, updating my iPad 2 via iTunes was faster than updating my iPhone 4S over the air. The first order of business is to update iTunes to version 10.7. Open iTunes and then click iTunes > Check for Updates to install the latest version.

Once iTunes is up-to-date, connect your iOS device. Click on your device under the Devices header in the left-hand column and click Check for Update.

(Credit: Screenshot by Matt Elliott/CNET )

A pop-up window will appear, alerting you that a new iOS version is available for your device. Click the Download and Update button. (Or, if you are going to need your phone in the near future, opt for the Download Only button to download it now and install later. iOS 6 is a 626MB download for the iPhone, which could take an hour or more, depending on your connection and the amount of traffic hitting Apple's servers.)

(Credit: Screenshot by Matt Elliott/CNET )

Click through two more setup screens that show you iOS 6's many new features and Apple's terms and conditions to start the download.

Once the download is complete, keep your iOS device connected until it restarts. After restarting, you will need to hop through four setup screens before you are off and running with iOS 6. On my iPad 2, the process looked like this:

(Credit: Screenshot by Matt Elliott/CNET )

(Credit: Screenshot by Matt Elliott/CNET )

To learn about all the new features iOS 6 ushers in, check out Jason Parker's full review of iOS 6. You can also read our complete guide to iOS 6.

Read More

How to install iOS 6

There are two paths for upgrading your current iPhone to iOS 6: over the air or through iTunes.

by Matt Elliott

 September 19, 2012 12:30 PM PDTFollow @themattelliott

Related stories

• CNET review: iOS 6 -- the must-have update you'll barely notice
• Complete guide to using iOS 6

If you didn't line up at your local Apple Store or preorder an iPhone 5, you can still upgrade your iPhone, iPad, and iPod Touch to the latest version of iOS released today. I should say it's likely you can upgrade your current device because the new version of Apple's mobile operating system, iOS 6, is compatible with most but not all previous-generation devices. Here's Apple's list:

(Credit: Screenshot by Matt Elliott/CNET )

You have two methods for downloading and installing iOS 6. You can simply update your iOS device over the air via the device's Settings, or you can connect it to your computer and use iTunes.

Method 1: Over the air
The easier of the methods is to grab your iPhone, iPad, or iPod Touch and update wirelessly. Before doing so, however, it's wouldn't be a bad idea to sync your device with iTunes if you haven't done so in a while. There have been instances with past iOS updates where users have reported the new iOS didn't install correctly, bricking their phone and forcing them to restore their phone before trying again. So, if your iOS device has talked to iTunes recently, go ahead and go to Settings > General > Software Update.

(Credit: Screenshot by Matt Elliott/CNET )

You should see iOS 6 listed, with a Download and Install button below it. Tap the button, agree to Apple's terms and conditions, and either heed or ignore Apple's advice to connect your device to a power source during the download to save battery.

(Credit: Screenshot by Matt Elliott/CNET )

After iOS 6 installs, your device will restart, which was a rather lengthy process in my experience (20 minutes or so, after the roughly 45 minutes it took to download and install). After restarting, you'll be greeted by a shiny, new iOS 6 lock screen. Slide to open your device and click through the following four setup screens:

(Credit: Screenshot by Matt Elliott/CNET )

Method 2: Update via iTunes
If you are near your computer with iTunes, it might be faster to update this way. In my experience, updating my iPad 2 via iTunes was faster than updating my iPhone 4S over the air. The first order of business is to update iTunes to version 10.7. Open iTunes and then click iTunes > Check for Updates to install the latest version.

Once iTunes is up-to-date, connect your iOS device. Click on your device under the Devices header in the left-hand column and click Check for Update.

(Credit: Screenshot by Matt Elliott/CNET )

A pop-up window will appear, alerting you that a new iOS version is available for your device. Click the Download and Update button. (Or, if you are going to need your phone in the near future, opt for the Download Only button to download it now and install later. iOS 6 is a 626MB download for the iPhone, which could take an hour or more, depending on your connection and the amount of traffic hitting Apple's servers.)

(Credit: Screenshot by Matt Elliott/CNET )

Click through two more setup screens that show you iOS 6's many new features and Apple's terms and conditions to start the download.

Once the download is complete, keep your iOS device connected until it restarts. After restarting, you will need to hop through four setup screens before you are off and running with iOS 6. On my iPad 2, the process looked like this:

(Credit: Screenshot by Matt Elliott/CNET )

(Credit: Screenshot by Matt Elliott/CNET )

To learn about all the new features iOS 6 ushers in, check out Jason Parker's full review of iOS 6. You can also read our complete guide to iOS 6.

Read More

10 Key Features in Windows 8: Tablets, Touch and More

Released just last week in Developers Preview mode, Windows 8 already contains more than 300 new features. At its Build developers conference, Microsoft pointed to plans to keep adding more new capabilities until Windows 8 evolves into a shipping product. Which of the existing features are most important to get to know about right now?

While no list like this can even approach 'all inclusiveness', our list of ten key features in Windows 8 ranges across new jargon such as "charms" and "snap muti-tasking," to first-time operatibility on ARM-based tablets, to major improvements around support for USB 3.0, touch keyboards, file copying, and more. Here, in no particular order of importance, is the list of ten:

1. Support for both x86 PCs and ARM tablets

Windows 8 is the first edition of Windows to operate on both ARM-based tablets and traditional x86 PCs based on ARM processors from Intel and AMD.

“Support for ARM-based chipsets, touch, and sensors makes Windows 8 work beautifully on your choice of a full spectrum of devices, such as 10-inch slates with all-day battery life, ultra-lightweight laptops, and powerful all-in-ones with 27-inch high-definition screens,” Microsoft contends, in a Windows 8 Guide distributed with Windows Developer Preview

In addition, the ARM edition of Windows 8 includes a new mode dubbed “always on, always connected,” designed to let tablets act like smartphones. Tablets can remain in standby mode without disconnecting from the Internet, and then wake up instantly.

Windows 8 is designed to work seamlessly across both PCs and ARM tablets. Yet until developers get a real start on apps for Microsoft’s still empty Windows Store, it’s tough to tell whether that will be universally true.

2. Touch-centric, Tiles-based User Interface (UI)

Although Windows 8 might look and feel like an entirely new “user experiemce,”, Microsoft is actually layering a new animation-enabled user interface (UI) on top of an only somewhat upgraded Windows 7.

The Windows 8 Start Menu is customizable through a mosaic of tiles, which differ from traditional desktop icons by letting you view live information from Windows 8 Metro style apps without actually accessing the apps.

In demoing the tile-based UI at last week’s Build conference , Microsoft showed how the tile for a Windows 8 weather app is able to display the current temperature in a city – along with projected temperatures for the next two days – without requiring you to open up the app. A tile for Windows Live Mail will show you your latest message, while a tile for a social networking app will show you notifications.

 “The [Metro] apps are full-screen. They’re beautiful.They’re designed for touch, but of course, they work great with a mouse and keyboard as well if that’s what you have. We wanted to make it really fast and fluid for you to switch between them,” according to Jensen Harris, lead program manager on the Microsoft Office User Experience..

Windows 8 users are also able to access Windows 7 apps. “Everything that runs on Windows 7 will run on Windows 8,” maintained Steven Sinofsky, president of Microsoft’s Windows and indows Live division, during a keynote at the Build conference. However, in order to access Windows 7 apps, you need to switch to a different built-in UI.

3. Charms

In large part, ‘charms’ is a new implementation of the traditional Windows start bar. Charms can also be used to quickly configure settings for individual apps. On an ordinary non-touch PC, charms are accessed by dragging the mouse to the bottom-left corner of the screen, to the same spot as the old Windows start button. On a tablet, you swipe from the right side of the screen to bring up charms.

Microsoft recently applied for a trademark on charms. The charms sidebar offers five sets of options, supporting both app-specific settings and system settings such as volume and brightness. The options include Start, Search, Share, Devices, and Settings. The Start option returns the user to the home screen. The Devices option presents a list of connected devices. Under the Share option, users can see social network sharing apps.

4. Snap Multi-tasking

‘Snap multitasking” is designed to make it easy to run two apps in Windows 8 side-by-side, to resize them, and to switch between them. On the right-hand side of the screen, you can snap an app into place.

You can make an app smaller or larger by dragging the bar for the app. To switch between apps in Windows 8, you swipe from the left-hand part of the screen.

However, Windows 8 does not allow you to view all of your running apps on a single screen. 

5. Windows 8 Control Panel

Beyond revamping the Windows task manager, Microsoft has also redesigned the control panel for Windows 8.  New options include Personalize, Users, Wireless, Notifications, General, Privacy, Search, and Share.

As Metro style apps become available, you'll be able to use the Personalize menu to customize the Start menu with tiles for calendar, music, e-mail, Netflix, and much more.

In a demo at Build, Julie Larson-Green, Microsoft's corporate VP of program management for Windows, showed how you’ll be able to position these Metro apps on the screen, and also to combine them into groups such as friends and games.

6. Web Navigation by Touch

The Internet Explorer (IE) 10 browser built into Windows 8 is designed to offer faster browsing through greater hardware acceleration, along with rapid gesture-based zoom, pan, and Web site navigation.

As in other areas of Windows 8, you can quickly access Windows 8 charms, as well as the two keyboards described below.

7. Two Touch Keyboards

Windows 8 also contains two soft keyboards: an “enhanced” traditional keyboard, plus a new thumbs keyboard for non-touch typists.

In efforts by Microsoft to make typing on a virtual keyboard faster and more accurate, the revised edition of the conventional keyboard suggests words on the screen as you type. You can then tap to selected a suggested word.  Microsoft also provides a spellcheck-like feature designed to automatically correct mistyped words – although like any other spellchecker, this feature carries the potential to cause its own errors.

The keyboards are also aimed at automatically adjusting to whaever human language you choose for Windows. These language settings will automatically apply to the entire computer, instead of only to specific apps

8. ‘Enhanced Copy Experience’ 

Windows 8 also introduces the ability to perform all current copy operations into a single dialog box, instead of requiring you to perform file copying in separate dialog boxes for each app.

The new dialog box for file copying lets you pause, resume, and stop each sopy operation currently under way. It will also warn you if you’re beginning to copy one version of a file on top of another.

Microsoft has also added a realtime throughput graph. “Now each copy job shows the speed of data transfer, the transfer rate trend, and how much data is left to transfer. While this is not designed for benchmarking, in many cases it can provide a quick and easy way to assess what is going on for a particular [copy] job,” noted Alex Simons, director of program management with the Windows 8 management team. 

9. Native USB 3.0 Support

New USB 3.0 ports operate at speeds up to ten times faster than )SB 2.0. To better support these speeds, Microsoft is outfitting Windows 8 with native USB 3.0 drivers.

Meanwhile, though, USB 3.0 will purportedly continue to work under Windows 7, through the use of third-party drivers.

“By 2015, all new PCs are expected to offer USB 3.0 ports, and over 2 billion new ‘SuperSpeed’ USB devices will be sold in that year alone,” said Dennis Flanagan, director of program management for the Windows 8 Devices and Networking Group, in a blog post. “There are also billions of older USB devices that Windows must remain compatible with.”

10. Better Support for Multiple Monitors

Windows 8 also brings increased support for multiple monitors, The Developers Preview of the new OS includes first-time capabilities for extending the taskbar across two PCs, without any need for third-party apps. You can also stretch wallpaper across two monitors, or display the Start screen on one PC and the desktop on the other, for instance.

It's also easy to switch between multiple monitors. The primary monitor has a start button, and the secondary monitor has a switcher button. Clicking or tapping on the switcher button will swap it out for the start button, allowing you to turn the secondary monitor into the primary one.

Read More